48
Time Correction Mode
Adjust time by auto or manual.
In live screen view, select System > Enable NTP > Auto or Manual.
Auto: The system time will be set by NTP server on the network. Enter the IP address of NTP
server and select the Time Zone. Select NTP Update to save setting. Select Activate to start auto
time adjustment.
[Note] Our default NTP server is located in the USA. If this does not work in your country, please
manually key in the desired NTP server.
Manual: User can set up time by manually. Enter the Year, Month, Day, Hour, and Minutes.
Select Confirm to save the settings.
Information
Display the information of Model Name, Firmware Version, Serial Number, IP Address, MAC
Address, and Time.
In live screen view, select System > Information.
To Next Page
Loading...
