60
Set the Camera Number
With multiple cameras connected, users can set each camera to buttons 1 to 3 on the remote control.
1. If PTZAPP detects the computer is connected to multiple VC/VB/CAM, you can select which
camera you like to control through the dropdown list.
2. Next, Click Change Binding button.
3. Select which camera number of remote control it maps to.
4. Click Save to save settings. To un-save the settings, click Abort.
[Note] If you only have one camera that requires no additional setting, the default is camera 1. If
camera 2 or 3 is selected, the remote will be unable to control the camera. In this case, please press
camera 1 on your remote.
To Next Page
Loading...
