Important Safety Instructions
The needles are extremely sharp and can cause serious injury. Keep hands and personal
clothing clear of needles during operation.
Do not remove the needle guards and do not operate the machine without needle guards
in place.
Disconnect power to the machine before replacing needles.
Do not attempt to remove the cover, or service or disassemble any component while the
ST9500 is connected to a power source. Disconnect the power cord before attempting to
replace any component.
Do not operate the ST9500 with the cover removed or make any attempt to defeat the
cover interlock switch. Moving parts and shock hazard can cause serious personal injury.
CAUTION Improper use of lubricants can cause machine failure and/or damage
to the garment.
Do not use any type of lubricant on the fastener path use only compressed air to
clean it.
Do not use any solvents on the ST9500.
WARNING For your safety the information in this manual must be followed to
prevent personal injury or loss of life
To Next Page
Loading...