Unpacking the ST9500
TM
1. Check the contents of the shipping box. It should contain the following:
1 ST9500
TM
Plastic Staple Attacher
1 Operator and Service Manual
3 Power cords
1 Programming cable
2. Remove the ST9500.
3. Remove the power cords, select the appropriate cord, and discard the unneeded cords.
□
For 220/240 VAC, UL/CSA
□
For 240 VAC, CE
□
For 110 VAC, UL/CSA
4. Visually inspect the ST9500 and the shipping materials for damage.
□
If the ST9500 is damaged, notify Avery Dennison immediately.
□
If the shipping box is also damaged, notify the freight carrier as well as Avery Dennison,
and save the shipping materials for the carrier to inspect.
To Next Page
Loading...