Specifications
Audio Output
1/4” TRS stereo, headphone or line level;
Stereo Mix Output,
Headphone/Line
Tip: Audio Left; Ring: Audio Right;
Sleeve: Ground
A-Net I/O
1 A-Net In, RJ45 connector;
Supports Pro16 and Pro16e
D/A Conversion
44.1/48kHz, 24-bit
Stereo Operation
Stereo Link, per channel pair;
Set at the input module;
Variable pan per mono channel or pan/spread per stereo
channel pair
Headphone Output
275 mW per side into 50 Ohms
(both sides driven)
Headphone Output
Impedance
5 Ohms
Freq. Response
3Hz-22kHz +0.2dB/-3dB at 50 Ohms
THD +N
< 0.003%
Signal to Noise
(unweighted)
-106dB (measured with zero data into all channels)
Latency
0.880 msec (measured from analog input to analog output)
A-Net Cables
Use shielded Cat-5e (or better) to stay below the CISPR 22 Class
B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits.
A-Net Cable Length 400 feet (122 m)
A-Net Pro16e Protocol
Supports original Pro16 16-channel data;
Supports Power Over A-Net
Power
24 VDC, 0.5 amp;
Power is supplied over the Cat-5 cable when connected to an
Aviom A-Net Distributor
Dimensions
10.26” (260.6 mm) wide x 6.14” (155.95 mm) deep;
1.91” (48.51 mm) high
Weight 1.3 lb. (0.59 kg)
Options
MT-1a Mic Stand Mount (uses 6-32 1/4-inch screws);
EB-1 Extension Bracket;
48
A320 PersonAl Mixer User GUide
To Next Page
Loading...
