36
AvMap G7 Farmnavigator – User Manual
Figure 3.2.b Operating functions during job activity
Below is a list of all the functions available:
Magnet
Move A-B lines according to the antenna position.
Streets
Move A-B guidelines some metres away from the antenna position. The
maximum displacement permitted is equal to half of implement width.
Shift cancellation
Delete shift and reset original A-B guidelines.
A-B guidelines list
If active, it shows the list of A-B guidelines saved and used in the eld.
Delete A-B lines
This feature allows you to delete the A-B guideline created in the eld. The
area already worked and coloured in green will not be deleted.
Table 3.2.d Functions available in the A-B menu
To Next Page
Loading...