Chapter 3: Operations 35
13. A system message will appear that states Connection to the Transmitter is lost. You will be
automatically returned to the Appliance Selection Menu screen.
To configure network settings for the receiver:
1. Press option 1 to access the Receiver Menu and press Enter. If the password option is enabled,
you will be prompted for a password.
2. Type the password and press Enter. The Receiver Main Menu will appear.
Figure 3.11: Receiver Main Menu
NOTE: The Network Configuration Menu is different for the Extender and Desktop modes.
To access the Network Configuration Menu in Extender Mode:
1. Press 1 to select the Network Configuration option and press Enter. The Network
Configuration Menu (Extender Mode) appears.
Figure 3.12: Network Configuration Menu (Extender Mode)
To Next Page
Loading...
