36 HMX Extender System Installer/User Guide
2. Press 2 to select the Transmitter IP Config option and press Enter. The old Transmitter IP
Address is displayed beside menu option 1.
Figure 3.13: Transmitter Configuration Menu on the HMX User Station
3. Press 1 to select the Transmitter IP Address option and press Enter. Type the new IP address
for the transmitter and then press
Enter.
4. Type 0 (zero) and press Enter to return to the Network Configuration Menu. If you made a
mistake and do not wish to save the changes you made to the network settings type
C and press
Enter.
The HMX user station will now automatically reset to apply the new network configuration. You
will be automatically returned to the Appliance Selection Menu screen. The connection to the
transmitter will be automatically restored.
To access the Network Configuration Menu in Desktop Mode:
1. Press 6 to select Appliance Mode in the Receiver Main Menu and press Enter. The Appliance
Mode Menu will appear.
2. Press 2 to select the Desktop Mode and press Enter.
3. To confirm your changes and apply those settings, type 0 (zero) and press Enter. You are now
in Desktop Mode.
To Next Page
Loading...
Need help?
General
