Need help?Do you have a question about the Baicells EP3011 and is the answer not in the manual?
General| Model | EP3011 |
|---|---|
| Category | Network Router |
| Device Type | LTE Router |
| Frequency Bands | 2.4 GHz |
| Ethernet Ports | 4 |
| WAN Ports | 1 |
| Max Download Speed | 150 Mbps |
| Max Upload Speed | 50 Mbps |
| Antenna Type | Internal |
| Power Supply | 12V/1A |
| Humidity | 5% to 95% (non-condensing) |
| Wi-Fi | Yes |
| Wireless Standard | 802.11 b/g/n |
| LTE Frequency Bands | B1/B3/B8/B38/B40/B41 |
| Security | WEP, WPA, WPA2 |
| Storage Temperature | -20°C to 70°C |
Provides a description of the Baicells SNAP PoE Router, model EP3011.
Lists the Baicells ODU CPE models supported by the SNAP POE Router.
Details the key features of the SNAP POE Router, including connectivity and standards.
Describes the physical interfaces on the back of the PoE router equipment.
Provides a step-by-step guide for installing the Baicells SNAP PoE Router.
Explains how to access the CPE's GUI login page and initial credentials.
Overview of the Status menu, providing a dashboard of key CPE information.
Configures IP address, subnet mask, and MTU size for the LAN interface.
Allows enabling/disabling SSIDs and configuring wireless network parameters.
Enables building wireless hotspots for guest users with authentication.
Sets the CPE to connect automatically or manually to the network.
Configures the CPE's routine scan of available frequencies for network connection.
Configures Access Point Names (APNs) for gateway connections.
Enables or disables the firewall for the CPE.
Filters services based on IP address, destination, or port range.
Redirects communication requests from WAN to LAN for services.
Configures IPsec network protocol suite for secure communication.
Configures Layer 2 Tunneling Protocol (L2TP) for VPN operations.
Configures Point-to-Point Tunneling Protocol (PPTP) for VPN connections.
Configures Generic Routing Encapsulation (GRE) for point-to-point connections.
Configures OpenVPN, an open-source VPN encryption protocol.
Used to change the login password for the CPE.
Configures and manages the CPE remotely via a web interface.
Resets the CPE, updates firmware, or patches modules.
Provides diagnostic tests like Ping and Traceroute for troubleshooting.
Details compliance with FCC rules for device operation and interference.
Details compliance with Innovation, Science, and Economic Development Canada standards.
To Next Page