Baicells EP3011 - PPTP

28
Table 12: L2TP
Field Name
Description
VPN
Click on the check box to enable VPN
Protocol
L2TP
Default GW
Click on the check box to enable a default gateway
Server IP
Server IP address
User Name
Enter a user name
Password
Enter a password
IPSec Encryption
Enable or disable
Remote Subnet
Remote subnet IP address
Pre-Shared Key
1-128 characters
3.8.2.2 PPTP
Point-to-Point Tunneling Protocol (PPTP) is a network protocol mostly used with Windows computers. Today,
PPTP is considered obsolete for use in VPNs because of its many known security deficiencies. Nevertheless,
PPTP is still in use in some networks. PPTP uses a TCP control channel and a generic routing encapsulation
tunnel to encapsulate PPP packets. Enable VPN using the check box (Figure 46), and select PPTP for the VPN
protocol. Enter the other parameters per Table 13.
Figure 46: PPTP
Table 13: PPTP
Field Name
Description
VPN
Click on the check box to enable VPN
Protocol
PPTP
Default GW
Click on the check box to enable a default gateway
Server IP
Server IP address
User Name
Enter a user name
Password
Enter a password
MPPE
Select the check box to enable Microsoft Point-to-Point Encryption