6
The Device Info pane displays the product name, software version, serial number, etc. The LTE Status pane
shows important operational information, such as the CPE's SIM card status and its IMSI and IMEI numbers,
wireless frequency being used, eNB connection status, and current signal strength and quality.
Under Throughput Statistics you will see downlink (DL) and uplink (UL) data rates for current throughput
(kbps), average rates, peak rates, and total throughput. The data is measured during a 3-second interval every
5 minutes. The APN Status pane displays any gateway connections. The bottom pane, Devices List, will show
details about all smart devices currently connected through the CPE. Refer to Table 6 for a description of the
Status fields.
Figure 6: Status
To Next Page
Loading...
Need help?
General