INTRODUCTION
INSTRUCTION CONTENT
I-E96-508C 1 - 3
•
Modular design permits removal and installation of power
modules while under power, without interrupting power to
the INFI 90 system.
INSTRUCTION CONTENT
This manual provides introductory, installation, operation, cal-
ibration, troubleshooting and maintenance information. Read
and understand this document before placing the power sys-
tem into service. A summary of section content follows:
Introduction
An overview of the system, description of hardware, glossary of
unique terms, reference documentation, and physical and elec-
trical specifications.
Description and
Operation
A block diagram to explain how key parts of the system
operate.
Installation
Handling, inspection, how to set up, install, wire and safety
considerations.
Operating Procedures
Power module start-up, how to use, individual controls.
Troubleshooting
Error indications, corrective actions, problem determination
and verification.
Maintenance
Provides a preventive maintenance schedule and covers main-
tenance procedures.
Repair/Replacement
Procedures
Procedures for power system repair and replacement.
Support Services
How to order replacement parts, obtain additional documenta-
tion and training.
Appendices
A quick reference guide of switch and jumper settings, module
power requirements, wiring diagrams and power system siz-
ing procedures and tables.
HOW TO USE THIS MANUAL
Read this manual in sequence. To get the best use of this man-
ual, read it from cover to cover, then go back to specific
sections.
1. Complete the steps in Section 3.
2. Read Section 4 thoroughly before powering up the system.
3. Refer to Section 5 if operating problems occur.
To Next Page
Loading...
