Banner Q5X Series - Reference Targets; RSD1 Remote Display

© Banner Engineering Corp. www.bannerengineering.com 42
ACCESSORIES
7.3. Reference Targets
All measurements are listed in millimeters, unless noted otherwise.
7.4. RSD1 Remote Display
Use the optional RSD1 for remote monitoring and configuring compatible devices.
Refer to the RSD1 instruction manual (p/n 199621) or quick start guide (p/n 199622) for more information. See Accessories on page 40 for the
required cordsets.
SMBQ5XM4F
• Fixing plates for mounting to back of sensor
• Stainless steel plates
• Customer supplied mounting plate thickness minimum 2 mm
maximum 4 mm with screws included in kit
BRT-Q4X-60X18
• Reference target for clear object detection or dual-mode applications
• FDA grade acetal material
BRT-Q4X-60X50
• Reference target for clear object detection or dual-mode applications
• FDA grade acetal material
RSD1 Remote Display
Model Output A and B Dimensions Male Wiring
RSD1QP Configurable
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
M4 X 0.7 ISO-6H
TAP THRU
25
8
3.4
2 x
ø4.5
18
6
60
2 x
ø4.6
50
6
60
78.0
[3.07]
68.0
[2.68]
28.0
[1.10]
1
4
5
3
2