Barco ClickShare CSE-800 Installation Manual

R5900049 /13 ClickShare CSE-80050
If the Base Unit does not start up automatically, use the standby button.
The standby button at the front can now fully control the unit.
The standby button has the following functions:
• When the system is awake, a short push triggers the system to go into standby mode.
• When the system is in standby mode, a short push triggers the system to wake up.
CSE-800 Installation

Barco ClickShare CSE-800 Specifications

General

Brand	Barco
Model	ClickShare CSE-800
Category	Projector Accessories
Language	English