Barco ClickShare CSE-800 Installation Manual

95R5900049 /13 ClickShare CSE-800
6. Click Finish configuration.
6.24 Status information Base Unit
Status information
The following information can be found:
• Model information, name and part number
• Serial number
• Firmware version
• First used
• Last used
• Current uptime: time since last startup
• Lifetime uptime: time used since first startup
• Overall status
Base Unit restart
1. Log in to the Configurator.
2. Click Support → Base Unit Status.
Image 6–43
3. To restart the Base Unit, click on Restart Base Unit.
A ClickShare system reboot message with progress bar is displayed while rebooting takes place.
When the reboot is finished, a re-login is necessary.
6.25 Date & Time setup, manually
About Date & Time setup
The date and time can be set manually using the time zone indication or using at least one NTP servers.
CSE-800 Configurator

Barco ClickShare CSE-800 Specifications

General

Brand	Barco
Model	ClickShare CSE-800
Category	Projector Accessories
Language	English