Setting the Color and Palette Modes
101
Now repeat steps 5-8 above for this display.
If you are using a Quad-Head Configuration repeat all of the
above steps for the two displays on the second display
controller.
Note: If you have a single display configuration and you have
enabled DualView, Windows will not allow you to attach the
second head. This is normal and not a bug.
After enabling DualView and setting the resolutions in a Quad-
Head Configuration you may need to drag the heads into the
proper position in the window on the “Settings” tab, so that the
arrangement in the window on the “Settings” tab matches the
physical arrangement of your configuration.
Setting the Color and Palette Modes
(See Barco Controller Control Panel Settings section in this
manual)
Configuring the Windows desktop
Note: In order to configure the Windows Desktop of your BARCO
C
ORONIS 5MP Display System you must be logged in using an
account with administrator privileges.
If you are using a color display in conjunction with your Barco
grayscale display(s) you should configure your desktop before
setting the resolution of the your Barco grayscale display(s).
To Next Page
Loading...
