BarcoMed control panel settings Single Source Master
62
MediCal QAWeb
Clicking on the QA Web button will launch the MediCal QAWeb
application. Please refer to the MediCal QAWeb manual for
information about this application.
Advanced properties for MXRT controller
To access the advanced properties configuration pages for the
display controller(s) for your B
ARCO CORONIS 5MP Display System,
click on the Advanced button in the Graphics Device Information
section.
There are several pages accessible from the advanced
configuration button. They are:
• Barco Adapter Configuration
• OpenGL
• Direct3D
• Rotation (when supported)
•Details
• OpenGL Profiles
Barco Adapter Configuration
The Barco Adapter Configuration page allows you to switch
between the following monitor configurations and display
options for the displays connected to a Barco MXRT controller:
Display Layout
• DualView
Both displays are enabled independent of each other.
• SingleView
A single large desktop spans across both displays.
•Clone
The primary display is cloned to the secondary display.
To Next Page
Loading...
