Installation
35
Installation
Precautions
• Keep your original packaging. It is designed for this display
and is the ideal protection during transport.
• Avoid reflections in the flat panel to reduce eye strain.
• Place the display on a strong and stable table or desk.
• Keep the display away from heat sources and provide
enough ventilation in case it is built in a rack or console.
• Make sure all equipment is switched off before connecting
the signals.
Before installing the display
Important:
In the factory, the height-positioning system in the display foot is
blocked with a clip to prevent damage during transportation.
Before installing the display, you must remove this clip.
Figure 14
Clip
To Next Page
Loading...
