Installing the BARCO MXRT drivers and software
46
Installing the BARCO MXRT drivers and software
Note: The installation dialog will display in English if your
operating system’s language is not supported.
This process applies to the following versions of Windows:
• Windows XP Professional,
• Windows XP Professional x64 Edition,
• Windows Server 2003,
• Windows Server 2003 x64 Edition,
• Windows Server 2008,
• Windows 2008 x64, and
• Windows Vista 32 & 64 Bit Edition.
You will need to install the Coronis 5MP system drivers and
software in the following cases:
• After you have installed the display controller(s) for your
B
ARCO CORONIS 5MP Display System in your system for the
first time.
• After you have reinstalled or upgraded your operating
system.
• After you have moved the display controller(s) to a
different PCI/PCIe slot.
• When you upgrade to a newer version of the MXRT driver.
• When you put additional MXRT display controllers in your
system.
1. You do not need to manually uninstall an existing driver
before updating to the current version. The Barco Product
Installation Wizard will detect any prior installations and start
the uninstallation process automatically.
Start your system. When the Found New Hardware Wizard
comes up, click Cancel. When the System Settings Change
window asks you to restart your computer, click No or
Restart Later.
2. Run the Barco Product Installation Wizard.
To Next Page
Loading...
