MediCal Pro installation and operation
95
MediCal Pro installation and operation
MediCal Pro software installation
Install MediCal Pro on the PC. Follow the instructions from the
MediCal Pro User Guide.
Important: Do not forget you have to have Administrator
privileges to install or uninstall MediCal Pro.
Using MediCal Pro
You can now use MediCal Pro to configure the complete
configuration and set up the Q/A tasks.
Proceed as follows:
1. Start MediCal Pro. If appropriate, you can connect to MediCal
Administrator.
2. Set up the configuration in MediCal Pro by using the
Configuration Setup wizard.
3. If necessary, align the displays' geometry settings.
4. For all the displays in the system, check if the DPMS setting
is turned on. Therefore, right-click on the display icon and
select Properties... from the drop-down menu. Then click on
Details...
Check if the Powersave option is checked. If not, check it.
This is necessary to use the DPMS possibilities of the display
controller.
5. For all the displays in the system, define (if necessary) and
select a Preset.
6. After selecting the Preset, MediCal Pro starts consistency
calibration automatically.
7. Define the Q/A task schedule.
To Next Page
Loading...
