67
Advanced Properties for BarcoMed Coronis or BarcoMed
Nio
Palette modes
From the Barco Drawing Modes tab you can select one of four
palette modes.
• Color to Gray compatibility
• User Modifiable Color Palette
• Static Gray Palette including standard system colors
• Static Gray Palette with NO system colors
User Modifiable Color Palette
This option allows applications to modify the palette contents
dynamically. As indicated in figure 2, this mode reserves the first
10 and last 10 entries in the palette for the Windows operating
system, but applications can manipulate the middle 236 entries.
This is the standard palette mode as configured by Windows.
Figure 2/ User Modifiable Palette
Note: If you are unsure whether or not your application requires
this “User Modifiable Color” mode, contact your application
provider.
Static Gray Palette including standard system colors
This option sets the palette to be a static set of 256 gray values.
Applications are denied the ability to dynamically change or
allocate palette entries. This prevents palette conflicts between
To Next Page
Loading...
