Maintenance
86
Maintenance
Panel
Take care not to damage or scratch the panel. Clean with a soft
woolen or cotton towel lightly moistened with plain water.
Cabinet
Do not use chemical cleaning products, benzene, toluene, xylene
or other solvents. Clean with a soft cloth dampened with mild
detergent and water. Repeat with water only and wipe dry with
a dry cloth.
Removing dust from the rear of the glass panel
It may be possible that dust particles have entered the display
and are stuck to the rear of the glass.
We recommend to let this cleaning procedure be done in a Barco
service center.
However, when really necessary, you can perform the cleaning
on site if you can work in conditions that are as clean and dust-
free as possible. This is to avoid more dust entering the display
when opening it.
To remove the glass panel:
Figure 5
1. Switch off the display.
2. Tilt the panel.
To Next Page
Loading...
