Overview
31
Overview
Introduction
The MFGD 5421, BARCO’s 21” 5 megapixel grayscale LCD display,
guarantees perfect image quality in medical imaging
applications.
The display combines a TFT (thin film transistor) liquid crystal
display panel structure and a built-in backlight with inverter for a
better picture quality. It is designed to meet the users’ needs for
performance, consistency, and outstanding image quality
through a streamlined development process.
The display can be used in portrait or landscape version, simply
by turning the panel. The tilt & swivel foot allows ideal
positioning of the panel, in height and viewing angle.
The panel can be adjusted by means of a control wheel on the
display.
I-Guard
I-GUARD
®
is Barco’s patent-pending, built-in calibration device,
continuously maintaining image quality. With I-GUARD
®
, QA
checks no longer need to disturb normal radiology activities, as
they can be performed while applications are running.
I-GUARD
®
allows radiologists or QA administrators to calibrate
their viewing stations or adjust the panel’s curve to DICOM
standards without administrator intervention.
Power saving (DPMS)
The MFGD 5421 is equipped with a power saving system.
When left idle for a certain time, the computer connected to the
display, will power down the display. The power saving system
can be switched on or off using the on-screen menus.
This system requires a computer imaging board that supports
power saving management.
To Next Page
Loading...
