59
This chapter describes how to configure the displays in your BARCO
C
ORONIS 5MP Display System using the tools available through the
Advanced button on the Settings tab of the Windows Display
Control Panel.
Note: If you purchased Barco Medical Displays only and not a
complete B
ARCO CORONIS 5MP Display System you will need to
refer to the user manual for the display controller you are using.
Languages supported
The BarcoMed tabs support the following languages:
English (U.S) (default)
Dutch
French
German
Italian
Japanese
Korean
Simplified Chinese
Traditional Chinese
Spanish
Note: To change between the languages select the correct region
via the Regional Settings Control Panel in your machine’s Start >
Settings > Control Panel.
Barco Driver Properties
Accessing the Barco tab
Note: You must have logged on to Windows using an account
with administrator privileges in order to use the Barco portions of
the Windows Display Control Panel to change any display
settings.
1. Open the Windows Display Control Panel by one of the
methods below:
To Next Page
Loading...
