Driver and software installation prerequisites
45
This chapter will guide you through the installation of the drivers,
software and documentation associated with your B
ARCO CORONIS
5MP Display System or Coronis 5MP(s).
The process for the B
ARCO MXRT family of controllers and
B
ARCOMED family of controllers is handled separately.
If you install Barco displays without Barco display controllers, no
drivers will be installed. Only the online user manual will be
installed on your system.
Driver and software installation prerequisites
Note: To install or remove the drivers, software, or
documentation you must be logged on as a user with
administrator privileges.
Your operating system must be installed and running before you
can install the driver, software and documentation for the display
controller(s) for your B
ARCO CORONIS 5MP Display System.
Before you begin make sure that all of your Coronis 5MP(s) are
connected to the appropriate display controller(s) in your system.
Note: This installation procedure is based on operating Windows
in “Classic” view style. If “Home” or “Default” view style is
selected in Windows, sections of this procedure may be different
than what is listed.
To Next Page
Loading...
