71
• SingleView
A single large desktop spans across both displays.
• DualView
Both displays are enabled independent of each other.
Graphics Board
Update Firmware... Button: Clicking this button will launch the
BarcoMed Hardware Configuration utility. This program allows the
user to flash update the firmware stored in the ROM of the
currently selected BarcoMed display controller. The BarcoMed
Hardware Configuration utility is implemented in a Wizard
format, which guides the user through the flash update
procedure. The user will be prompted to select a firmware update
file to use for the update process. This file will be provided by
Barco Medical Imaging Systems if and when a firmware update is
required.
Device Details
From the Device Details tab you can access the Device Details
page, which provides detailed information about the display
controller connected to the active display. This information is
useful in debugging issues that may occur when using your MFGD
5421(s).
To Next Page
Loading...
Need help?
General
