Installing the BARCO MXRT drivers and software
49
Uninstalling the drivers and software
To uninstall the Barco drivers, software or documentation for your
MFGD 5421 Systems, please use the Windows Add/Remove
Programs or Uninstall utility. This can be found in the Windows
Control Panel. For Vista use Programs & Features.
Note: When uninstalling the Barco MXRT drivers, the dialog box
shown in figure 1 will appear, and select the driver listed.
Figure 1: Barco MXRT Driver Removal Wizard (driver version may be
different than what is pictured)
Note: Vista Only: After uninstalling the driver, shutdown the
machine and remove the card. If you leave the card in the
system, Vista will automatically reinstall the driver.
If you are uninstalling the Barco MXRT drivers prior to doing a
driver upgrade, complete the Barco MXRT Driver Removal Wizard
as described, and reboot the system into Safe Mode. From Safe
Mode, run the Program Files\Barco\ MXRT_DriverCleaner batch
file to remove any remaining files. Then you can reboot into
regular Windows mode to install the new driver.
To Next Page
Loading...
