Installing the BARCOMED CORONIS or Nio drivers and software
53
c) Click Browse and browse to the root directory of the
B
ARCO CORONIS 5MP Display System Installation CD-ROM
and click on the file, Setup.exe, and click Open.
d) Click OK.
or
a) Browse to the root directory of the B
ARCO CORONIS 5MP
Display System Installation CD-ROM and double click on
the file, Setup.exe.
3. Click Next twice.
4. Follow the wizard’s on-screen instructions to complete the
installation.
Note: When the page shown in figure 3 appears you may either
click Next to accept the default settings or if you know the
settings required for your viewing application, you may select
them now and then click Next. You may change these settings
later by accessing the Barco Driver tab within the Windows
Display Control Panel.
Figure 3
Please refer to your application manuals for information on
the correct Palette and Drawing modes to select.
To Next Page
Loading...
