Installing the BARCOMED CORONIS or Nio drivers and software
56
3. Click Run.
4. Click Browse and
a) Browse to the root directory of the B
ARCO CORONIS 5MP
Display System Installation CD-ROM.
b) Click on the file, Setup.exe, and click Open.
or
a) Browse to the root directory of the location where you
saved the contents of your B
ARCO CORONIS 5MP Display
System Installation CD-ROM.
b) Click on the file, Setup.exe, and click Open.
5. In the Open address window, place your cursor at the end of
the line of text that appears and add the following text after
Setup.exe, a space and -silent. Click OK.
Example (where D is the name of your CD/DVD drive):
D:\Setup.exe -silent
See figure 5 for an example of how the command line
window should look when using the silent install from the
B
ARCO CORONIS 5MP Display System Installation CD-ROM.
Figure 5: Command line installation
To Next Page
Loading...
