BarcoMed control panel settings Single Source Master
64
Main Settings
In the Main Settings section there is a slider bar which allows the
user to adjust the OpenGL or Direct3D settings for optimum
performance, optimum quality or for a point in between. There is
also a checkbox provided for enabling Custom Settings.
Custom Settings
Note: Barco recommends that you use the default settings,
unless your viewing application vendor provides detailed
information on custom settings.
In the Custom Settings section the user can fine tune the
following options:
• Anisotropic filtering
• SMOOTHVISION
• Wait for Vertical Sync
Antisotropic filtering
Anisotropic filtering is a technique that preserves detail on
surfaces that have three-dimensional perspective and fade away
into the background. It works best when used in conjunction with
Mipmapping.
Anisotropic filtering can be set to favor either an increase in
system processing performance or improved image quality.
Note: If you are unsure how to configure anisotropic filtering, use
the Application Preference option. Your display will
automatically adjust to the application’s requirements.
Please refer to the on-line help (click on the “?” in the control
panel’s openGL tab) for more information on using advanced
features such as Anisotropic Filtering.
SMOOTHVISION
The Advanced Settings tab enables you to apply ATI’s
SMOOTHVISION technology for full-scene anti-aliasing.
SMOOTHVISION improves image quality by removing jagged
To Next Page
Loading...
