On-screen display (OSD)
39
Reading room definition submenu
Name Description
Measured ambient
light
Indicates the ambient light actually
measured by the ambient light sen-
sor on the front of the display. This
is a read-only value.
Averaged ambient light Shows the average of the measured
ambient light since the display was
switched on. This is a read-only
value.
Reading room Indicates the reading room type you
are editing. You can select another
room to edit by using the Up or
Down touch keys.
Max. ambient light This indicates the maximum ambi-
ent light that corresponds to the
selected reading room.
If the measured ambient light is
higher than the value entered here,
you should take measures to
darken the room or select another
reading room type.
Preset corr. value This value is taken into account in
the calculation of the DICOM DF if
Continuous DICOM ALC is switched
off and DICOM Offset is set to “Pre-
set”.
To each reading room type corre-
sponds another preset value.
To Next Page
Loading...
Need help?
General