On-screen display (OSD)
56
To select a DICOM offset:
1. Select the DICOM display function. See To select a display
function (DF):, on page 53.
2. Switch Continuous DICOM ALC off. See To switch continuous
DICOM ALC on/off:, on page 55.
3. In the ALC & DICOM Options menu, use Up
or Down to select
DICOM Offset. Use Enter
to go into edit mode.
4. Use Up
or Down to select an offset.
5. Use Enter
to save the changes.
You can select the following offsets:
Value Description
Dark Room The DICOM DF will be recalculated
taking an ambient light value of 0
lux into account.
This means that the measured
ambient light does not influence
the DICOM DF.
Preset The DICOM DF will be recalculated
taking a preset ambient light value
into account. This value is deter-
mined by the selected Reading
Room and can be adjusted manu-
ally within certain limits.
To Next Page
Loading...
Need help?
General