R5906848 /04 DP2K SLP Series260
Image 19-11
3. Browse the package file name. Click on Browse (2) to open the Browser window (3).
The correct file type is already filled out (4).
4. Browse for the desired file (5), select the file and click on Open (6).
Note: File has extension pkg.
The Package file name line is filled out (7).
5. Enter the device IP address (10) or click on Browse to open a device selection window (11).
Note: The IP of the connected projector is already filled out. When using the DC Update Companion
as stand alone program, then this field is blank.
Software update via Communicator (DC update companion)
To Next Page
Loading...
Need help?
General
