Barco DP2K-10SLP User Manual

R5906848 /04 DP2K SLP Series32
4.1 Introduction DP2K-SLP Series Mains Input
Introduction
The Mains Input consist in a terminal block, an ON/OFF switch, a mains input filter and a solid state relay. The
Mains Input compartment is located at the rear right side of the projector.
The purpose of the solid state relay is to switch off the Light Source when the projector is in Sleep mode.
Component identification Mains Input
2
3
1
4
Image 4-1
1 ON/OFF switch.
2 Solid state relay.
3 Mains filter.
4 Terminal block.
Mains Input

Barco DP2K-10SLP Specifications

General

Brand	Barco
Model	DP2K-10SLP
Category	Projector
Language	English