R5910123 /00 FL40 / FS40 Projectors
100
Image 8-62
2. If any custom Blend files are available, select the desired file.
Image 8-63
3. Click on the on/off button on top to activate the selected Blend file.
8.6.8 Advanced blend
Description
The Advanced Blend Function is intended for blending in complex shapes in multiprojector installations.
Due to the complexity, a separate manual has been prepared for this subject, and can only be performed by
an authorized installer. There is no user interface for this function.
8.7 Illumination
About
The LED slider is only available for the FS variant of the projector..
Home/Installation /Illumination/Power
Review light source status and adjust (dim) and adjust LED and IR power from 0 to 100%.
Default: 100%
How to reduce the output light
In the menu, select:
Installation menu
To Next Page
Loading...
Need help?
General
