R5910123 /00 FL40 / FS40 Projectors
83
8.5 Warping
8.5.1 About warping
About
Image warping is the process of digitally manipulating an image to compensate for the distortion of the screen,
typically by non perpendicular alignment of the projector versus the screen. The image will then typically occur
as shown inImage 8-21.
While an image can be transformed in various ways, pure warping doesn’t affect the colors.
Ideal Picture
Distorted Picture
Image 8-21
8.5.2 Warping – On/Off
About warping on/off
By toggling between on and off the warping functionality can be enabled or disabled.
How to toggle
1. In the main menu, select Installation → Warp.
Installation menu
To Next Page
Loading...
