R5910123 /00 FL40 / FS40 Projectors
108
9.5 Reset
What can be done?
All settings and values on the projector can be reset to its default values. This can be done for one or more
settings separately, or all settings together (factory reset).
Default settings
The following settings are default settings:
Topic Setting
Default value
UserInterface Theme Light
Network Communication LAN, Automatic settings
System Eco Mode (if applicable) Available
Screen Screen luminance - Unit nits
Optics High Contrast Off
Illumination Power 100%
ImageConnector Color Space auto
Signal Range auto
ImageResolution Output Resolution (if applicable) 4K UHD
ImageWarp Screen size 5120x3200 / 2560x1600
4 corner
Bow
Warp off, no warp
Warp files Disabled, no files selected
ImageBlend Blend/Mask size
Black Level
disabled, all value to zero
Black Level Files
Blend Files
Disabled, no files selected
ImageRealColor P7 Realcolor all set to native
ImageStereo Sync delay 0 µs
Swap eye Off
Dark time lowest value available
ImageDisplay Display mode AutoStereo
ImageOrientation Orientation Table, Front
ImageSource Source files Standard
ImageFeatures Contrast mid value
Brightness mid value
Saturation mid value
Sharpness mid value
Gamma mid value
Cropping (if applicable) Off
Aspect Ratio (if applicable) 16:9
System settings menu
To Next Page
Loading...
Need help?
General
