R5910123 /00 FL40 / FS40 Projectors
74
8.1 IR / Night vision functionality
About
IR / Night Vision functionality is only available for the FS40 variant of the projector..
In combination with Night Vision Goggles (NVG), this will give a realistic rendering of the environment. This
will visualize in a realistic way, night time, dusk and dawn, and limited visibility scenarios.
The IR light source has a wavelength of 740nm
How to enable IR/Night Vision.
Enter the menu Home / Installation / Display setup and select NightVision in the scroll down menu.
Image 8-2
To set up the IR illumination, enter the menu Home/Installation/Illumination/Power. This menu shows two
sliders; one for the LED (daylight), and one for the IR LED (Night Vision). The sliders are scaled from zero –
100% power.
Installation menu
To Next Page
Loading...
Need help?
General
