R5910123 /00 FL40 / FS40 Projectors
32
3.1 Approved lenses
Approved lenses
This table contains the lenses that are within the certification of the projector.
Partnumber Lens Name
Description (WQXGA)
R9801216 EN41 FLD+ 1.7 - 2.5 : 1
R9801226 EN42 FLD+ 0.8 : 1
R9801230 EN43 FLD+ 1.2 - 1.7 : 1
R9801211 EN44 FLD+ 2.5 - 4.6 : 1
R9801220 EN45 FLD+ Long Focus 0.8 - 1.21 : 1
R9801221 EN46 FLD+ Short Focus 0.8 - 1.21 : 1
R9801295 EN47 FLD+ 0.65 : 1
R9802241 EN61 FLDX 1.7- 2.5: 1
R9802242 EN63 FLDX 1.2 - 1.7 : 1
R9802243 EN66 FLDX 0.8 - 1.21 : 1
R9802244 EN67 FLDX 0.65 : 1
R9802232 EN68 FLD+ 0.28:1
3.2 Usable lenses
Usable lenses
This table contains existing lenses that can be used together with the projector, but the projector is not certified
with these lenses.
Partnumber Lens Name
Description (WQXGA)
R9801214 EN11 FLD 1.6 - 2.32 : 1
R9801218 EN12 FLD 0.74 : 1
R9801228 EN13 FLD 1.24 - 1.6 : 1
R9801209 EN14 FLD 2.37 - 3.79 : 1
R9801225 EN15 FLD 1:16 : 1
R9801249 EN16 FLD 3.8 - 6.5 : 1
3.3 Replace a lens
Lens lever
The L40 lens mount and lens lever is designed to prevent damage to the lens board while providing an easy
and stable lens change procedure.
The lens lever, located at the bottom of the lens mount, slides between two positions, far left (default position
— unlocked) and far right (locked).
Lenses