Barco LED-PRO - Page 152

138 LED-PRO • User’s Guide
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
LED-PRO Remote Commands
• Query:
ICPHO? in
Returns the Input Clock Phase Offset in the format
= nn
S CPHO 1 15 (Adjusts Input clock phase offset manually to 15 on input 1.)
S CPHO? 1 (Queries the Input clock phase offset of channel 1.)
f`ifpq
• Description: Lists the names of all saved Input configurations.
• Parameters: None
• Returns: List the names of saved Input configurations, one name per line.
S ICLIST (Lists all saved Input configurations.)
f`abi=ÑáäÉå~ãÉ=
• Description: Delete saved Input configuration.
• Parameters: filename - name of configuration to be deleted (not case sensitive).
S ICDEL file1 (Deletes Input configuration stored as FILE1.)
f`ob`=áå=ÑáäÉå~ãÉ
• Description: Recalls saved Input Configuration.
• Parameters:
in - Input chnl [1-4]
filename - configuration that is being recalled (not case sensitive).
S ICREC 3 file1 (Recalls Input configuration stored as file1 for channel 3.)
f`opq=áå
• Description: Reset Input Configuration for the specified channel.
• Parameters: in - Input chnl [1-4]
S ICRST 1 (Resets Input Configuration for channel 1)
f`p^s=áå=ÑáäÉå~ãÉ
• Description: Saves Input configuration to non-volatile memory.
• Parameters:
filename - name given to configuration when it is stored. This filename is
translated to all upper case characters. If same input configuration name
exist, it will be overwritten.
in - Input chnl [1-4]
S ICSAV 3 file1 (saves Input configuration as FILE1 for channel 3.)