Barco LED-PRO - Page 163

LED-PRO • User’s Guide 149
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
LED-PRO Remote Commands
• Query:
OVATV?
Returns the Output Vertical Active value in the format
= nnnn
S OVATV 768 (Set Output Vertical Active to 768)
S OVATV? (Queries Output Vertical Active)
lsmlp=åååå
• Description: Set Output Vertical Position. The minimum and maximum limit is
dependent on the output resolution.
• Parameters: nnnn - Output Vertical Position: nnnn[ (Output V Sync) - +(Output V
Active)]
• Query:
OVPOS?
Returns the Output Vertical Position value in the format
= nnnn
S OVPOS 35 (Set Output Vertical Position to 35)
S OVPOS? (Queries Output Vertical Position)
lspvk`=åååå
• Description: Set Output Vertical Sync Width. The minimum limit is 2 and
maximum limit is dependent on the output resolution.
• Parameters: nnnn - Output Vertical Sync Width: nnnn[2-(Output V Total -Output
V Active - Output Vertical Front Porch -2)]
• Query:
OVSYNC?
Returns the Output Vertical Sync Width value in the format
= nnnn
S OVSYNC 6 (Set Output Vertical Sync Width to 6)
S OVSYNC? (Queries Output Vertical Sync Width)
lsqlq^i=åååå
• Description: Set Output Vertical Active. The minimum and maximum limit is
dependent on the output resolution.
• Parameters: nnnn - Output Vertical Total: nnnn[ (Output Vsync + Output Vactive
+ (Output Vpos - Output Vsync)) - +(Actual Output V Total * 9/5)]
• Query:
OVTOTAL?
Returns the Output Vertical Total value in the format
= nnnn
S OVTOTAL 806 (Set Output Vertical Total to 806)