601–0445 /05 Loki 111
How to reset all projector settings
1. In the main menu, select System Settings → Reset.
2. In the Reset menu, select RESET ALL and click OK.
How to reset one or more projector settings
1. In the main menu, select System Settings → Reset.
Image 9-6
The Reset menu is displayed.
Image 9-7
2. Navigate to the checkbox next to the settings that need to be reset and press OK.
Multiple selections are possible.
3. Select RESET and press OK to reset all selected settings.
9.6 Lens features
About
In order to prevent unintentional lens adjustments, especially after e. g. a completed setup and adjustment,
there is a possibility to disable certain lens adjustment functions. These functions are directly accessible via
the remote control, and can by that easily be adjusted by accident.
Enter the menu shown below, and disable the desired functions by toggling the desired buttons. The menu
below shows all lens options in enabled position.
System settings menu
To Next Page
Loading...
Need help?
General
