Chapter 6: System Information
The System Information page provides the following system status and access to system settings
System Status
l Software Information: provides build version number, date, serial number, model type and license type for the
device.
l Firmware Information: provides firmware versions and dates of different firmware on the device.
l System Information: provides uptime and load average.
l Memory Utilization: provides system memory utilization
l System Time:shows system time and NTPstatus
l Temperature and Fan Information: provides temperature of different critical components and zones on the
devices
System Settings
l Fan Speed of the System: provides way to change the fan speed on the Device. The default fan speed option is
set to Auto (High). Other options are High, Medium and Low. After changing the settings, they take effect
immediately. To make the change persistent across reboots, hit Save Settings:button under left navigation panel
WARNING: It is highly recommended to not change the fan speed setting and leave it at factory default value of
Auto.
WARNING: Reducing the fan speed can adverse effect of the operation of the device and will reduce MTBF and
product reliability. If the fan speed is reduced (e.g. for acoustic purposes,), it shall be done at customers own risk.
For
more information, see "Authorization Table" on page 33
K5903085
24
Chapter 6: System Information
To Next Page
Loading...
Need help?
General
