l This setting must be configured on both the connected encoder and decoder
l Only the same keyboard type can be used on both ends of the connection (e.g.if encoder is get to German and
decoder/software client should also be set to German)
NOTE: When you have finished making changes, click "Apply" at the bottom of the page. Click "Save Settings" to
permanently save your changes to the device.
13.7 KB/M Settings
13.7.1 Decoder Keyboard/Mouse Parameters
You can specify your keyboard and mouse type to ensure it is detected by the system as well as set the KbM Mode.
You can specify what KBMMode you wish the decoder to operate in
l KBM Mode: Configures the keyboard/mouse Mode:
o
Local: The decoder will only transmit keyboard/mouse bytes out via the HOST port to control a local PC
o
Remote: The decoder will transmit keyboard/mouse bytes out over the network to any connected encoders
K5903085
56
Chapter 13: Keyboard/Mouse (KbM)
To Next Page
Loading...
Need help?
General
