Barco UDX Series User Manual

R5906112 /09 UDX series60
4
4
4
Image 3-18
4. Plug in the power cord at the projector back side.
5. IMPORTANT LAST STEP — Update the firmware of the installed module. Use the complete software
package to install the firmware via Projector Toolset or USB stick.
Tip: When a complete new software image is placed on the projector, all programmable components
will be updated with the latest version.
Input & Communication

Barco UDX Series Specifications

General

Brand	Barco
Model	UDX Series
Category	Projector
Language	English