R5906112 /09 UDX series 97
You can reset all coordinates to the default values (to native) by selecting Reset modes to native.
Press OK button to reset.
How to choose one of the P7 presets
1. In the main menu, select Image → Advanced → P7 Realcolor.
Image 7-24: Advanced menu — P7 Realcolor
The P7 menu is displayed.
Image 7-25: P7 Realcolor menu
2. Choose one of the pre-defined presets:
• Standard: A color standard for all UDX projectors, which may be considered the new native settings for all
UDX projectors. Default for UDX.
• Native: Projector native color settings.
• DCI-P3: Color standard for Cinema.
• EBU: European color standard for broadcasting.
• SMPTE-C: American color standard for broadcasting.
• Rec. 709: Color standard for high-definition televisions (HDTV).
Image 7-26: Example of one of the presets: Rec. 709
Note: After choosing one of the presets, you can still alter the values of the coordinates to your own
choosing, similarly to how you set custom P7 values.
Use Reset to return to the default values of the chosen preset.
GUI – Image
To Next Page
Loading...
Need help?
General
