Beckhoff EL3773 - Fig. 116 Representation of a Created PLC Array Variable (Aui_Samples) to Link with Oversampling Pdos of EL3773; Fig. 117 Insertion of a Free Task

Commissioning
EL3773108 Version: 2.5
Fig.116: Representation of a created PLC array variable („aUI_Samples“) to link with oversampling PDOs of
EL3773
Step 2b: Creation of a PLC variable via a free task
When a POU is not needed onto the particular system, a referenced variable could be applied via a free task
also. If a free task is not existing still yet, it can be created by a right-click to “Task” of the project within
SYSTEM with “Add New Item…”.
Fig.117: Insertion of a free task