987892AF
iii
Revision History
Note: Changes that are part of the most recent revision are indicated in text by a bar in the margin of the
amended page.
Issue AE, 06/2016
Updates were made to the following sections: RoHS Notice, Multi Compliance Label.
Issue AF, 04/2019
Updates were made to the following sections:
• Warnings and Cautions Found in this Manual
• Introduction, Deck
• Introduction, removed Optional Devices
• Table 2, Troubleshooting the Biomek NX Instrument
• CHAPTER 1, Multichannel Pod Troubleshooting
• CHAPTER 2, Using the Plate Sensor
• Figure 3.13, Framing to the corner of four wells
• Figure 3.14, Framing to the center of a well
• Figure 3.15, Manual Teaching the X- and Y- axes
• Figure 3.16, Manual Teaching the X- and Y-axes
• Figure 3.17, Manual Teaching (teach Z)
• CHAPTER 4, Accessing Manual Control
• Figure 4.5, Overview Advanced Manual Control for a Multichannel Pod
• CHAPTER 4, Unloading Tips (Windows 10 only)
• APPENDIX A, System Specifications
• Removed Appendix B, Using a Stacker Carousel
• Related Documents
This document applies to the latest software listed/ version and higher versions. When a subsequent
software version affects the information in this document, a new issue will be released to the Beckman
Coulter website. For labeling updates, go to
www.beckman.com/techdocs and download the latest version
of the manual or system help for your instrument.
To Next Page
Loading...
Need help?
General
