Beckman Coulter Biomek NXP User Manual

987892AF
4-7
Manually Controlling the Biomek NX in Biomek Software
Using Advanced Manual Control
4
2 Choose Advanced Controls.
3 Select Pod1. Advanced Manual Control for the pod appears (Figure 4.5). The current position is
shown in Current Position.
4 Choose Close to close Advanced Manual Control.
5 Choose Exit to close Manual Control.
Moving the Pod to a Safe Roving Height
Use Move Z-Max in Advanced Manual Control to move the pod to its highest configured height. This
helps to avoid collisions when moving the pod around the deck manually.
NOTE The possibility of collisions is not completely eliminated by this command; for example, if the gripper
is extended and holding a microplate, and the pod is moved over a tip box on a tiploader, a collision could
occur.
1 Choose Instrument > Manual Control. Manual Control appears (Figure 4.2).
2 Choose Advanced Controls.
3 Select Pod1. Advanced Manual Control for the pod appears (Figure 4.5).
4 Choose Move Z-Max.
5 Choose Close to close Advanced Manual Control.
6 Choose Exit to close Manual Control.

Beckman Coulter Biomek NXP Specifications

General

Brand	Beckman Coulter
Model	Biomek NXP
Category	Laboratory Equipment
Language	English