BAL_2152_EP1_Central grease lubrication pump_0816_EN EDV-Nr. 1090200430
11.2.2.Extras:
Adjustment of the adjusting ranges:
The adjusting ranges can be changed by means of the diagnostic software BEKA-DiSys.
All adjusting ranges for the lubrication time can be combined with all cycle time ranges.
Adjusting ranges:
Lubrication times: Cycle times:
1 to 16 min. (16 notches à 1 min.) 0,5 to 8 h (16 notches à 0,5 h)
2 to 32 min. (16 notches à 2 min.) 2 to 32 min. (16 notches à 2 min.)
2 to 32 sec. (16 notches à 2 sec.) 2 to 32 h (16 notches à 2 h)
Exchange of the stickers:
After a change of the mode of operation or the adjusting range, the sticker in the inspection
window of the control unit has to be exchanged.
Labels can be ordered in German language with various lubrication and cycle time
combinations:
Other languages are available on request!
Cycle time
Lubrication time
1 min. to 16 min.
2 min. to 32 min.
2 sec. to 32 sec.
I
II
III
0.5 h to 8 h
0490030325
0490030328
0490030331
2 min. to 32 min.
0490030326
0490030329
0490030332
2 h to 32 h
0490030327
0490030330
0490030333
Sticker in the inspection window
of the control unit
Connection of the
system diagnosis
29
EN
BEKA 2016 All rights reserved!
To Next Page
Loading...
Need help?
General
